Electronic Board, Rogers PCB, Rogers, High Performance, RF Identification Tags,Multi-Layer
Abis Circuits Co. Ltd is a great PCB manufacturer that was established in 2006 and is based in Shenzhen (China’s “Silicon Valley”).
What is the PCB used for?
After the electronic equipment adopts the printed board, due to the consistency of the same type of printed board, the error of manual wiring is avoided, and the automatic insertion or mounting of electronic components, automatic soldering, and automatic detection can be realized, which ensures the quality of the electronic equipment. , improve labor productivity, reduce costs, and facilitate maintenance.
Double-sided is an extension of single-sided. When single-layer wiring cannot meet the needs of electronic products, double-sided is used. Both sides have copper cladding and traces, and the lines between the two layers can be conducted through vias to form the required network connections.
What are the Characteristics of printed Circuit boards?
PCB aluminum substrate is composed of circuit layer, thermal insulation layer and metal base layer; Circuit layer (that is, copper foil) is usually etched to form a printed circuit, so that each component of the component is connected to each other. In general, the circuit layer requires a great current carrying capacity, so that thicker copper foil should be used, the thickness is generally 35μm~280μm;
Thermal insulation layer is the core technology of PCB aluminum substrate, it is generally made of special ceramic filled with special polymer, small thermal resistance, excellent viscoelastic properties, thermal aging resistance, can withstand mechanical and thermal stress. Ims-h01, IMS-H02, LED-0601 and other high performance PCB aluminum substrate thermal insulation layer is the use of this technology, so that it has excellent thermal conductivity and high strength electrical insulation performance;
The metal base is the support component of the aluminum base plate, which requires high thermal conductivity. Generally, it is aluminum plate, but also can use copper plate (which can provide better thermal conductivity). It is suitable for drilling, punching and cutting and other conventional mechanical processing. Compared with other materials, PCB materials have incomparable advantages. Suitable for power module surface mount SMT. No heat sink, greatly reduced volume, excellent heat dissipation effect, good insulation and mechanical properties.
What certificates and capacity does ABIS have?
We have ISO14001, ISO9001, UL, and so on.
| Raw material | FR-4, High TG FR-4, PTFE, Aluminum Base, Cu base. Rogers, etc |
| Board Thickness | 0.20mm--8.00mm |
| Layer | 1 Layer-20 Layer |
| Insulation Layer Thickness | 0.075mm--5.00mm |
| Min.hole size | 0.1mm (drilling hole) |
| Max. Board size | 200mm*600mm |
| Out Layer Copper Thickness | 18um--350um |
| Inner Layer Copper Thickness | 17um--175um |
| NPTH Hole Tolerance | +/- 0.075mm |
| PTH hole Tolerance | +/-0.05mm |
| Outline tolerance | +/-0.13mm |
| Surface finished | HASL, ENIG, Chem. Tin, Flash Gold, OSP, Gold finger |
| Solder Mask Type | LPI |
| Others | RFQ. |
What is your Lead Time?
| Category | Q/T Lead time | Standard Lead Time | Mass Production |
| |
| 2 Layers | 24hrs | 3-4 working days | 8-15 working days |
| |
| 4 Layers | 48hrs | 3-5 working days | 10-15 working days |
| |
| 6 Layers | 72hrs | 3-6 working days | 10-15 working days |
| |
| 8 Layers | 96hrs | 3-7 working days | 14-18 working days |
| |
| 10 Layers | 120hrs | 3-8 working days | 14-18 working days |
| |
| 12 Layers | 120hrs | 3-9 working days | 20-26 working days |
| |
| 14 Layers | 144hrs | 3-10 working days | 20-26 working days |
| |
| 16-20 Layers | Depends on the specific requirements |
| |
| 20+ Layers | Depends on the specific requirements |
We are not only good at product quality but also FINANCIALLY FIT because we pay attention to goodwill since 2006 in this opening city-Shenzhen, China.
Product Tags:
|
|
Aluminium Single Sided PCB Circuit Board 1oz Copper For LED Lighting Images
|
